Product Introduction

Shore-based cable management system is mainly used for shore-side cable plug on board for ship power supply, is the shore power frequency conversion power supply for docked ships power supply system in the cable management equipment. Shore-based cable management system put on the shore side, the ship to complete the power supply to leave the port and the cable management system will be the shore ship connecting the cable neatly stored in the cable management system. Ships docked into the port power, cable management system will be the shore power power supply output cable plugs sent to the When the ship is docked into the harbor to use electricity. The cable management system will send the output cable plug of shore power to the docked ship to supply electricity which provides a flexible and convenient facility for the docked ship to collect and put away the shore power cables.

Product Features

(1) Automatically store and release the shore power connection cable;

(2) With automatic cable management function, during the use of shore power, the cable winch can automatically release or store the shore ship connecting cable according to the change of ship's position and tide to prevent the cable from being too tight or too loose;

(3) It has the function of continuous adjustable tension of the take-up and put-down cable;

(4) Cable winch provides interlock or alarm signal, when the cable release excessive, the number of remaining cable turns on the winch to reach the alarm value, send out a switching signal for shore power management system to issue sound and light alarm; when the number of remaining cable turns on the winch is equal to the set trip protection value, send out a switching signal for shore power management system to issue a sound and light alarm, and at the same time, disconnecting the ship side of the safety circuit, the emergency cut off the shore-based circuit breaker

(5) With fault alarm function, when the cable winch has abnormal fault, the fault signal or value will be uploaded to the shore power management system;

(6) With torque limitation function, when the frequency conversion motor or system failure, hysteresis coupling can ensure that the cable can be pulled out smoothly;

(7) With automatic detection of cable conveyor system jamming function and it sends out alarms and interlocks signals. This function needs to be detected continuously under the automatic management state of the cable winch to prevent the occurrence of major safety accidents in which the cable is pulled out or the equipment is seriously damaged;

(8) Electrical control box panel with fault sound and light alarm, manual / automatic mode switching, local / remote operation location switching. System start, cable release, cable collection, stop and emergency stop buttons. There are also buttons for increasing speed and decreasing speed.